Vacuum Sintering and Degrease Integrated Furnace_Hunan XIrui automation equipment Co., Ltd.

Hunan Enrui automation equipment Co., Ltd. 湘ICP备18019693号 www.300.cn

HOME

GRAPHITIZATION FURNACE

Vacuum Sintering and Degrease Integrated Furnace

basic information

Categories:

POWDER METALLURGY SINTERING FURNACE

heat

DESCRIPTION

Application：It is mainly used for degrease and sintering of hard alloy, powder stainless steel, magnetic materials, special ceramics, refractory metal and alloy (tungsten, molybdenum, tungsten copper).

Characteristic

●Continuous degrease and sintering are realized in one furnace. Such practice avoids repeated handling, heating and cooling in furnace, improves product quality, shortens production time and increases production efficiency.

●Sintering under low pressure is possible under the protection of argon, nitrogen and gases of original nature and volatilizing loss of element is reduced.

●Directional pressure different air flow degrease intensifies degrease effect, leaving no dead corner of grease in furnace, enabling complete degrease.

●Graphite heating element is used for heating, independent zones are divided for temperature control. Programmable PID regulation is adopted for even and precise control of temperature.

●The specially used degrease seal box and grease trap are free from contamination to inner wall, insulation panel and heating element, degreasing and trapping in more efficient way.

●Inflation control: the inner pressure control device achieves micro-negative constant pressure sintering, restrains metal volatilizing loss and improves tightness and quality of products.

●Precise and reliable man-friendly graphic operation interface (man-machine dialogue touch screen) and analog control panel

Product Model Specification	JR-ZKTS-30X30X60	JR-ZKTS-35X35X70	JR-ZKTS-40X40X100	JR-ZKTS-50X50X120	JR-ZKTS-55X55X160
Volume(L)	54	85	160	300	484
Rated temperature（℃）	1500	1500	1500	1500	1500
Limit temperature（℃）	1600	1600	1600	1600	1600
Power（KW）	75	90	120	200	300
Effective heating zone（mm）	300x300x600	350x350x700	400x400X1000	500x500X1200	550x550x1600
Temperature control	Shimaden thermostat is used.
Heating mode	Resistance heating
Vacuum system	Slide Valve Vacuum Pump + Roots Vacuum Pump
Sintering Environment	vacuum
Rated power supply voltage（V）	380
Configure transformer according to design（V）	Configuration of transformer in front of furnace according to design
Vacuum limit（Pa）	6X10ˉ²（Vacuum cold state ）

The next article

Vacuum Sintering Furnace