Large Size Vertical High Temperature Graphitization Furnace_Hunan XIrui automation equipment Co., Ltd.

Hunan Enrui automation equipment Co., Ltd. 湘ICP备18019693号 www.300.cn

HOME

GRAPHITIZATION FURNACE

Large Size Vertical High Temperature Graphitization Furnace

basic information

Categories:

GRAPHITIZATION FURNACE SERIES

heat

DESCRIPTION

Application：Ultra-high temperature graphitization furnace within 3000°C is particularly used for production of large size C/C graphitized crucible, C/C tube and graphitization of carbon material in lots.

Technical Parameters, Specification and Model No.：

●High volume: large size graphitized crucible is made for graphitization of large amount of carbon material; adopt medium-frequency induction heating for rapid temperature rise and high efficiency.

●Low energy consumption and high stability: double layer aluminum oxide block insulation is adopted for the first time in the world, maintaining low energy consumption and good stability, preventing carbon felt and coil being short-circuited. With the design, fire is well controlled with good effect, low heat loss while equipment is well stabilized.

●Electric furnace may be installed for single set of power depending on the sintering process time requirement and a furnace may be energized individually. Temperature rise and drop with power-off in continuous operation.

●Digital flow monitoring system: each water flow is monitored and under protection by power cabinet. Hi-performance medium-frequency contact is used for furnace changeover with comprehensive PLC water, power and air automatic control and protection systems.

Product Model Specification	XR-SMH-Φ80X120	XR-SMH-Φ90X160	XR-SMH-Φ100X200	XR-SMH-Φ120X200
Volume(L)	703	1000	1500	2260
Rated temperature(℃)	2800	2800	2600	2600
Limit temperature(℃)	3000	3000	2800	2800
Effective heating zone(mm)	Φ800X1400	Φ900X1600	Φ1000X2000	Φ1200X2000
Power(KW)	500	600	800	1200
Frequency(HZ)	1000	1000	1000	1000
Discharging mode	Up-discharge/down-discharge
Temperature control	Shimaden thermostat is used.
Heating mode	Induction heating
Vacuum system	Rotary-vane vacuum pump (Roots vacuum pump are installed for high vacuum need).
Sintering Environment	Gas like N² and Ar².
Rated power supply voltage(V)	380
Configure transformer according to design(V)	750
Vacuum limit(pa)	100（Vacuum cold state）

On a

Lower Output Graphitization Furnace